Search Results

Drager Fabius OS Description Features: Weight: 296 lbs. (134.2 kg) (base unit without vaporizers or cylinders) Dimensions: 40.7 x 52 x 33 ″ (103.5 x 132 x 84 cm) (W X H X D) (with Cosy and 3-Vaporizer Mount) Power Supply: 100 – 240 VAC, 50/60 Hz, 2.3 A max. (non-configurable) Operation Time: Up to 120 minutes, minimum 45 minutes. (With fully charged batteries) Ventilator E-vent: Electronically controlled, electrically driven Operating Modes Standard: Volume Controlled Ventilation, Manual Ventilation, Spontaneous Breathing Operating Modes Options: Pressure Controlled Ventilation, Pressure Support Breathing frequency: 4 to 60 1/min. Max. Minute volume (MV): 0 to 99.9 L/min. Positive end-expiratory pressure: 0 – 20 cmH2O (PEEP) Inspiration / Expiration ratio: 4 : 1 to 1 : 4 (TI:TE) Pressure Limiting: 15 – 70 cmH2O (PMAX) Tidal Volume (VT): 20 – 1400 mL in Volume Control Inspiratory pause (TIP:TI): 0 – 50 % Inspiratory pressure (PINSP): PEEP + 5 to 65 cmH2O Inspiratory flow (InspFlow) 1: 0 – 75 L/min in Volume and Pressure Control 10 – 85 L/min in Pressure Support Pressure Support Level (Δ PPS): PEEP + 3 to 20 cmH2O Min. Frequency for apnea-ventilation: 3 – 20 1/min and “ OFF ” (Freq. Min) Trigger: 2 – 15 L/min. Integrated safety functions: Sensitive Oxygen Ratio Controller (S-ORC) guarantees a minimum O2 concentration of 23% in an O2/N2O mixture N2O cut-off if O2 fresh gas valve is closed or if O2 flow is less than 0.2 L/min. Audible and visual (flashing red LED) indication in case O2 pressure drops below 20 psi (1.4 bar) ± 4 psi (0.3 bar) In case of electricity and battery failure, manual ventilation, gas delivery and agent delivery are possible Positive pressure relief valve opens at 75 ± 5 cmH2O. Negative pressure relief valve opens at – 7.5 to – 9 cmH2O Range of fresh gas flow indicators: 0.00 to 12.0 L/min. Total fresh gas flow meter: 0 to 10 L/min, calibrated with a mixture of 50 % O2 and 50 % N20 mixture O2 flush: At 55 psi (3.8 kPa x 100): max. 50 L/min. At 50 psi (3.4 kPa x 100): max. 35 L/min. Vaporizer mount: Auto Exclusion Dräger mount Control screen: 6.5” (16.5cm) black/amber Monitoring: Continuous monitoring of inspiratory O2 concentration, breathing frequency, tidal volume, minute volume, mean or plateau pressure, peak airway pressure as well as PEEP In addition, all fresh gas flow information is displayed as virtual flow tubes Serial interface: 1 x RS 232 (Standard) Protocols: Vitalink and Medibus Data available for export: All fresh gas flow, ventilation and O2 data, flow and pressure real-time waveform Volume of CO2 absorber: 1.5 Liter, Option: Dräger Medical’s prefilled CLIC absorber (1.2 l) Gas supply: O2, N2O & Air Cylinder yokes: O2, N2O, Air, pin index yokes Additional accessories: Gas scavenging, patient suction, power outlet strip, additional O2 flow tube Volume of entire compact breathing system: 1.7 Liter + bag

MRI EQUIPMENTS Our MRI systems are re-certified prior to shipment, which means the manufacturer will accept it for coverage under its own warranty or service plan We use factory-trained engineers for inspection, de-installation, refurbishing/remanufacturing, repair, and installation We are registered with the FDA as a medical device company. This means we must comply with strict standards for every piece of MRI equipment we buy, refurbish or resell Every MRI scanner is accredited through the American College of Radiation Accreditation for Magnetic Resonance Imaging Our process follows our strict standards as well as FDA guidelines, re-certification requirements, and protocols for accreditation from the American College of Radiology (ACR). This can be a painstaking process for us, simply because sometimes we'll never get past Step 1 with an MRI machine. If it doesn't pass our initial rigorous inspection, we walk away from that system, no matter good the price looks. Is it a waste of time? Absolutely not. While it's expensive for us to inspect a MRI system, we reject MRI systems with a problematic history or do not meet our strict standards and requirements. Often it means we're passing on a bargain-priced machine, but we know that eventually the cost and frustration of down-time and repair costs will negate any possible savings. Unfortunately these machines find their way on the market and some dealer is making a lot of money... and the customer is losing money. That's not who we are. Here's what we do: Inspection: Every MRI unit we consider for purchase goes through a rigorous pre-purchase inspection. This is a key step... a historically problematic MRI system will likely cause headaches in the future. Sometimes today's "bargain" is tomorrow's "wish I hadn't done that". De-installation: Manufacturer-trained engineers carefully remove the system from its old site and prepare it for its new life elsewhere. The MRI machine is disassembled down to its component level and fully tested. Each component is accepted, repaired, or replaced to meet manufacturer's specifications. Re-certification: The machine is then re-certified to be accepted by the manufacturer for warranty coverage. Financing: Our leasing experts can help you get the best rates quickly and easily. Logistics: The MRI is carefully packaged and shipped to its destination, installed, and tested. RF Shielding/Magnetic Shielding: The room and facility are inspected, tested, and ensured for proper Magnetic and RF shielding Rigging: Proper rigging of the magnet is performed by an experienced rigging professional Accreditation: Technicians have the MRI accredited by the ACR. Applications and Training: Applications specialists train the facility's technicians on their new MRI imaging machine. Warranty: Every STF MRI machine is fully warranted and covered by STF . Extended Service Coverage: STF offers significant savings over the manufacturer on service contracts. However, because the MRI has been re-certified, the manufacturer will also offer its own extended service contracts. The choice is yours. GE Signa 3.0T Magnetom Avanto Magnetom Trio GE Signa HDx 1.5T GE Discovery MR450 1.5T

I want to join the webinar, Sign me up! First Name Last Name Email Message Submit Thanks for submitting!

CANON AQUILION ONE Description Features: The Aquilion One CT machine was the first CT scanner to enable the acquisition of entire structures with one volume scan. The refurbished Aquilion One CT scanner’s dynamic volumetric acquisition protocols can also review joint structures and organs over multiple rotations in 3D, showing real-time dynamic movement. An entire organ can be captured at one time, resulting in ultrafast scan times, greatly increased patient comfort and dramatic radiation dose reduction. REFURBISHED AQUILION ONE FEATURES Clear image quality 320 detector row CT Covers 16 cm in a single 0.35-second rotation Scan an entire organ in one single rotation Enables comprehensive exams Improves patient comfort Total patient radiation dose reduced by almost 55% Widest patient table available with up to 660lb maximum load iStation™ multilingual voice prompts and movies for enhanced patient compliance

GE SIGNA 3.0T Description Features: The GE Signa 3.0T MRI machine will provide you a new range of diagnostic capability for whole body. Each GE Signa 3.0T MRI system is equipped with the widest range of advanced clinical applications possible to accommodate an array diagnostic challenges. Specifications: - Field Strength: 3.0T - Configuration: Cylindrical - high homogeneity; - Synchronization: Respiratory Gating, ECG/Peripheral; - Imaging modes: Cine, Multi-Slab, POMP, Fast, Volume, Multi Slice, Single; - FOV: 1 cm - 40 cm continuous; - Magnet type: Superconducting; - Bore diameter: 55cm; - Magnet weight: 15102 kg incl. cryogens; - Dimension: 260 x 238 x 265 cm; - Power requirements: 480 or 380/415 V, 3-phase II; - Cooling system: Closed-Loop Water Cooled; - Cryogen Use: Less than 0.14 L/hr liquid He; - Strength: 40 mT/m; - 5 Guass Fringe Field: 5.4 m x 3.2 m

Anesthesia Machines Star Tech Fusion provides a wide selection of new anesthesia machines and professionally refurbished anesthesia machines as well as used anesthesia machines. The anesthesia machines have advanced functionalities and features that will help you work more efficiently and effectively. Standard features include an ergonomic design and a user-friendly operation. You can create an anesthesia workstation that is tailored to your requirements so you can concentrate on patient care. Anesthesia machines are equipped with a variety of technologies, including smart software applications, useful features, decision-support tools, flexibility, and other helpful features. This innovative solution, which is complemented by our patient monitoring solutions brings patient-relevant information to the point-of-care and ICU-quality ventilation therapy into the OR. You can find the best anesthesia station to provide individualized treatment across a wide range of patient acuities. This may reduce postoperative complications and speed up preoperative workflows. You can combine patient safety with financial and operational goals using our anesthesia delivery systems. This allows you to adapt to changing healthcare issues by using innovative decision support tools. Types of Anesthesia Machines for Patient Care Integrated Systems MRI-Compatible Portable Systems Small Footprint Proprietary Components Drager Fabius OS Drager Perseus A500 Drager Fabius MRI GE Aisys CS2 GE Datex-Ohmeda Aestiva MRI

GE Discovery MR450 1.5T Description Features: The GE Discovery MR450 1.5T MRI machine provides the most advanced capabilities available in MR imaging. Equipped with a proven, short bore, superconducting magnet, the GE Discovery MR450 1.5T MRI features 64 element architecture than can accommodate patients up to 500 pounds. Providing accelerated parallel imaging and high homogeneity, each used GE Discovery MR450 1.5T MRI offers both single acquisition and multi-slice imaging with exceptional fat and water separation. Built for high productivity, the GE Discovery MR450 1.5T MRI machine will enable you to conduct in-room patient set-up in as little as 30 seconds and start scanning in just a few simple steps. GE DISCOVERY MR450 1.5T FEATURES True real-time cardiac imaging Industry-leading gradient performance Full 3D kernel for more accurate reconstruction High-resolution 16-channel head, neck and spine images VIBRANT for bilateral breast imaging in a single exam 500lb weight limit

Drager Perseus A500 Description Features: Ventilation in the operating room: The Perseus A500’s TurboVent 2 ventilation technology supports ICU-quality ventilation across all patient applications. Airway pressure release ventilation (APRV) and Volume AutoFlow allow you to continue protective ventilation therapy in the operating room. The anesthesia machine’s breathing system layout enables patients to breath spontaneously and eases gas concentration changes to assist in managing cases with certainty. Low- and minimal-flow anesthesia tools: The low-and minimal-flow anesthesia tools on the Perseus A500 are designed to enhance the clinical, environmental and financial impact of anesthesia delivery. Its Low Flow Wizard guides clinicians to the lowest fresh gas flow possible so that anesthetic agent consumption and costs are minimized. The heated breathing system of the anesthesia machine is designed to reduce condensation, Enhanced workplace ergonomics: The Perseus A500 offers a generous, well-lit workspace for organization and documentation. With various shelving options, hooks, and drawers, there is ample room. Castor cable deflectors and the anesthesia machine cable channels help you keep up a clutter-free workspace. The recently designed breathing system of the Perseus A500 could be disassembled and reassembled in just a few easy steps.

GE Signa HDx 1.5T MRI Description Features: The GE Signa HDx 1.5 Tesla MRI scanner is an advanced version of the GE Signa HD 1.5T MRI machine. The Signa HDx includes improvements over the Signa HD, including faster scan times, higher channel count, fast reconstruction, improved image quality, and better image quality with more difficult-to-image patients. It is designed to produce repeatable results by having automatic coil identification for each protocol and automatic extraction of scan parameters from an image. Each used GE Signa HDx 1.5T MRI is equipped with GE’s XVRE™ volume-reconstruction engine for image generation in almost real time. GE’s GEM hybrid acceleration technique uses variable sampling to provide the fastest image acceleration, while TRICKS-XV technology provides entire 3D volumes in as little as 2.5 seconds with micro-fine detail. GE Signa HDx 1.5T MRI scanner review The Signa HDx is a more dramatic upgrade to the Signa HD than we would think with the simple “x” being added to the name. This is a very high performance scanner that is easy to use and has high definition imaging. It also includes the popular features such as the detachable patient table, and automatic breathing commands for patients in their native language. REFURBISHED GE SIGNA HDX 1.5T FEATURES 1.5T-optimized protocols accessible via easy user interface AutoVoice allows for preprograming commands in many languages GE-exclusive motion control and acceleration techniques can be recorded for re-use Dockable patient table accommodates patient weights up to 180 kg (400 lbs) Acoustic management reduces in-bore noise PROPELLER for consistent image quality in head studies, even with moving, pediatric, elderly or confused patients Specifications: - Configuration: Short Bore Compact; - Synchronization: Respiratory Gating, ECG/Peripheral; - Imaging modes: Single-Slice 2D, Cine, Multi-Slab, 3D Volume Images, Multi Slice; - FOV: 1 cm - 48 cm continuous; - Magnet type: Superconducting; - Cooling system: Closed-Loop Water Cooled; - Cryogen Use: Less than 0.13 L/hr liquid He;

Magnetom Trio Siemens Magnet MRI Description Features: The MAGNETOM Trio 3.0T MRI machine is a very popular MRI scanner due to its ease-of-use, signal-to-noise ratio, and its flexibility. Specifications: - Field Strength: 3.0T - Configuration: Short Bore Compact; - Imaging modes: Multi-Oblique, Multi-Angle, Volume Study, Multi-Slice, Single; - FOV: 40cm; - Magnet type: Superconducting; - Magnet weight: 12000kg; - Dimension: 221 x 244 x 213; - Power Requirements: 380/400/420V; - Power Requirements 2: 440/480V; - Cooling System: 2-Stage Refrig, Single Cryogen; - Cryogen Use: 0.12 L/hr Helium; - Bore diameter: 60cm; - Strength:40 - 45 mT/m; - 5 Guass Fringe Field: 3.4m/5.9m;

GE Ohmeda Aespire View Description Features: The GE Aespire View is a cost-effective solution for operating rooms and surgery centers. The Aespire View offers Precision Flow Technology to manage your patient’s gas delivery through consistent pneumatic gas flow mixing, dual flow tubes and individual flow controls. Accuracy in low-flow scenarios is ensured with a minimum O2 flow of 50 mL/min and low-pressure leak testing is facilitated with an auxiliary common gas outlet. The Aespire View has an integrated standard AGCO and the option for integrated auxiliary O2, suction control, CO2 bypass and multiple monitor integration kits. The Aespire View features a large, 12-inch color ventilator display with GE’s Advanced Breathing System (ABS) for low-flow anesthesia. The option for Total Flow Sensing module allows for clinicians to electronically measure, display and export both individual gas flow and total fresh gas flow, helping to manage costs. Clarity of view…Clarity of decision Features 12-inch color ventilator display with color waveforms and alarm message indicators Compact and lightweight design for easy maneuverability Enhanced monitor integration capabilities with GE Healthcare Anesthesia Monitor and Compact Monitor Options Total Fresh Gas modules for electronic measurement and display of the total fresh gas flow and individual gas flow (O2, Air, N2O) Integrated auxiliary O2 flowmeter and suction control Advanced Ventilation: 7900 SmartVent* Maximum versatility for full patient range Ventilation Modes: VCV (Volume Control) PCV Pressure Control (optional) PSVPro* (Pressure Support with Apnea Backup) (optional) SIMV/PSV (Synchronized Intermittent Mandatory Ventilation with pressure support) (optional) SIMV-PC (Synchronized intermittent Mandatory Ventilation with pressure control) (optional) PCV-BG (Pressure Controlled Ventilation – Volume Guaranteed) (optional) Electronic PEEP Automatic fresh gas flow (tidal volume) compensation Cardiac bypass case mode Direct access to ventilator parameter settings Pressure waveform for visual reference on a breath-by-breath basis Smart alarms alert user to specific problems and affected parameters Inspired oxygen monitoring Advanced Breathing System (ABS) Easy to clean Autoclavable Latex-free Fast response for low flow anesthesia Easy removal with no tools required Integrated design so there are less parts and connections. (Helps reduce potential for leaks and misconnects) One step bag/vent switch turns ventilator on/off Optional CO2 bypass with electronic detection of “absorber off” Optional EZChange and condensor

SOMATOM DEFINITION 64 CT Description Features: The Definition 64 Slice CT scanner is one of the latest models available from Siemens. This Siemens Definition 64 Slice CT system for sale offers precise images, streamlined workflow for shortest time to diagnosis, and intelligent applications that are easy to use for more confidence in less time, and the lowest dose possible with Siemens CARE Dose4D and SAFIRE low dose technology. Siemens CARE Dose4D low dose technology reduces patient radiation by up to 70%. Specifications: - 78cm Gantry aperture; - OIL/AIR, OIL/WATER tube cooling; - 100-80kW output; - Range: 28-665mA (optional 800); - Max load capacity 227 (299 Optional); - Reconstruction matrices 512x512;